PB600

This machine can be supplied in Wire or Tube designations	Click to enlarge Click here to go back
This machine has become the industry standard with manufacturers of beer coolers, soft drinks dispensers, refrigerators, air conditioners and small bore automotive componenets.

Technical Specifications

Max Wire Diameter	2.0-6.5mm (.08"-.260")	Maximum Feed	80 metres/min
Max Tube Diameter	2.0-16mm (.08"-.63)	Bend	±0.01°
Bend Radii	2.0mm (.08") to infinity	Feed Unit	±.025mm (.001")
Feed Length	Infinite	Head Rotate	±0.1°
Return Feed Length	740mm (29")	Number of Feeds	Infinite
Angle of Bend	0-180°	Number of Bends	infinite

Productivity

Reload	5 seconds	Switch	30 minutes
10 bend 3D Component	15 minutes	Number of Instructions	25 programming steps

Power Supply

Amperage

8 Amps

Voltage

380-440V 3ph 50 or 60 Hz

Measurements

Machine Actual Dimensions	320 x 190 x 175 cm	Coil Holder Actual Dimensions	175 x 100 x 121 cm
Machine Nett Weight	1000 Kg. (2440 lbs)	Coil Holder Nett Weight	280 Kg. (616 lbs)
Machine Gross Dimensions	380 x 200 x 190 cm	Coil Holder Gross Dimensions	200 x 140 x 98 cm
Machine Gross Weight	1500 Kg. (3360 lbs)	Coil Holder Gross Weight	350 Kg. (770 lbs)

Click here to go back

Terms and Conditions, Privacy Policy, Copyright Pneuform © 2002.