PB400
This machine can be supplied in Wire or Tube designations
The PB400 is specifically designed to work on the smaller diameter wires and tubes.
Technical Specifications
Max Wire Diameter
1.0-6.5mm(.04"-.260")
Maximum Feed
80 metres/min
Max Tube Diameter
Bend
0.01
Bend Radii
1.0mm (.04") to infinity
Feed Unit
.025mm (.001")
Feed Length
Infinite
Head Rotate
0.1
Return Feed Length
740mm (29")
Number of Feeds
Infinite
Angle of Bend
0-180
Number of Bends
Infinite

Productivity
Reload
5 seconds
Switch
30 minutes
10 bend 3D Component
15 minutes
Number of Instructions
25 programming steps

Power Supply
Amperage
12 Amps
Voltage
380-440V 3ph 50 or 60 Hz

Measurements
Machine Actual Dimensions
419 x 190 x 175 cm
Coil Holder Actual Dimensions
175 x 100 x 121 cm
Machine Nett Weight
2000 Kg. (4400lbs)
Coil Holder Nett Weight
280 Kg. (616 lbs)
Machine Gross Dimensions
450 x 210 x 225 cm
Coil Holder Gross Dimensions
200 x 140 x 98 cm
Machine Gross Weight
2810 Kg. (6182 lbs)
Coil Holder Gross Weight
350 Kg. (770 lbs)
Click here to go back


Terms and Conditions, Privacy Policy, Copyright Pneuform © 2002.