PB1000
This machine can be supplied in Wire or Tube designations
The PB1000 is designed to bend wires from 4-10mm.
Technical Specifications
Max Wire Diameter
4.0-10.0mm (.16"-.394")
Maximum Feed
80 metres/min
Max Tube Diameter
Bend
0.01
Bend Radii
3.0mm (.12") to infinity
Feed Unit
0.025mm (.001")
Feed Length
Infinite
Head Rotate
0.1
Return Feed Length
740mm (29")
Number of Feeds
Infinite
Angle of Bend
0-180
Number of Bends
Infinite

Productivity
Reload
5 seconds
Switch
30 minutes
10 bend 3D Component
15 minutes
Number of Instructions
25 programming steps

Power Supply
Amperage
23 Amps
Voltage
380-440V 3ph 50 or 60 Hz

Measurements
Machine Actual Dimensions
500 x 195 x 170 cm
Coil Holder Actual Dimensions
175 x 100 x 121 cm
Machine Nett Weight
3000 Kg. (6614 lbs)
Coil Holder Nett Weight
280 Kg. (616 lbs)
Machine Gross Dimensions
525 x 210 x 190 cm
Coil Holder Gross Dimensions
200 x 140 x 98 cm
Machine Gross Weight
3810 Kg. (8382 lbs)
Coil Holder Gross Weight
350 Kg. (770 lbs)
Click here to go back


Terms and Conditions, Privacy Policy, Copyright Pneuform © 2002.